WBBA Exclusive Item - Beyblade Burst Cho-Z BBG-34 WBBA Ex Union Diabolos 00E.BR

Union Diabolos 00Expand Bearing is a Stamina Type Beyblade released by Takara Tomy as part of the Burst System as well as the Gatinko Layer System. It was released as a WBBA.

Bearing features a free spinning, low angled cone tip composed of PolyOxyMethylene (POM) plastic and supported by ball bearings, akin to a mix between Yielding and Bearing Drive from Metal Fight Beyblade.

WBBA Exclusive Item -  Beyblade Burst Cho-Z BBG-32 WBBA Special Booster ZB

Zwei Bahamut Outer Assault' Zan is an Attack Type Beyblade released by Takara Tomy as part of the Burst System as well as the Gatinko Layer System.

Luinor L4 is a wide Energy Layer designed for Left-Spin Attack that features five dragon heads, representing the anime's rendition of this Layer's beast; a dragon, with one in the center of the Layer and four that line each of the wings that make up the points of contact, creating a diamond and thus aggressive and high recoil design. The snouts of the dragons and the tip of each wing are molded into the shape of spear heads which are meant to represent this Layer's Japanese namesake; the Roman Soldier Longinus of Christian Mythology who stabbed Christ with a lance.
As part of the Cho-Z Layer System and like previous Luinor/Longinus Layers, Bloody Longinus features metal in its design; in this case, each of the outer dragon heads are made of metal. The inclusion of metal makes Bloody Longinus heavier than most SwitchStrike/God Layers.
The heavy weight of Bloody Longinus' metal dragon heads generate high inertia which increases the Layer's KO and Burst potential. However, the Left-Spin nature of Luinor L4 means that it and a Right-Spin opponent's Layer will spin together like gears if they are of similar spin speed, which heavily reduces recoil and the rate of Bursts. However, the recoil-heavy diamond shape can still create strong KO potential, though not to the degree of Luinor L3, in Opposite-Spin battles and makes Luinor L4 outclass its predecessor in Burst Attack potential in Left-Spin vs. Left-Spin battles. 
Furthermore, Luinor L4 is very wide in shape, which increases its Attack range and allows greater room for error in Banking Patterns. While the opposite spin allows for some degree of Spin Equalization, it is not to the degree of Geist Fafnir or Spriggan Requiem.
Like many other Cho-Z Layers, Bloody Longinus is unbalanced which increases the risk of Bursts, is liable to break Banking Patterns and drains Stamina. However, these issues can be solved with the use of a Level Chip that fits underneath the Layer.
#Takara #Tomy #Beyblade #Burst #Cho-Z #B110 #Starter #Bloody #Longinus

Takara Tomy Beyblade Burst Cho-Z B-106 Booster Emperor Forneus

Emperor Forneus is a round Defense Type Energy Layer that features twelve counter-clockwise blades that create a low-recoil design and two shark heads that go from the perimeter to the center, meant to represent the Layer's namesake; the sea monster Forneus, a Great Marquis of Hell in demonology, the sea monster

Winning Valtryek is an Attack Type Energy Layer, the center features a feathered, armored face facing forward, akin to its predecessor God Valkyrie, meant to represent the Layer's namesake; Odin's handmaidens of Norse mythology, albeit changed to match the anime's rendition; an armored knight. Like its predecessors, Wonder Valtryek V4 features three large wings as the primary points of contact, granting the Layer high KO and Burst Attack potential. As part of the Cho-Z Layer System, Winning Valkyrie features metal in its design; in this case, concentrated on the wings.

Like many other Cho-Z Layers, Winning Valkyrie is unbalanced which increases Burst risk, is liable to break Banking Patterns and drains Stamina. However, these issues can be solved with the use of a Level Chip that fits underneath the Layer.

#Takara #Tomy #Beyblade #Cho #Z #B104 #Starter #Winning #Valkyrie

Buster Xcalibur, like its predecessors, is an Attack Type Energy Layer based on the legendary sw0rd Excalibur that features a large sw0rd running down the length of the layer, the end of which protrudes from the bottom which acts as the primary point of contact. Unlike previous Xcalibur Layers such as Sieg Xcalibur and Xeno Xcalibur, Buster Xcalibur’s contact point is very pronounced which creates high Knock-Out and Burst Attack potential, but also creates high recoil. As part of the Cho-Z Layer System, Buster Xcalibur features metal in its design. in this case, the sw0rd is made of metal, akin to its predecessor Sieg Xcalibur. However the tip of the sw0rd is covered in plastic, to reduce the possibility of breaking the opponent's Layer. Buster Xcalibur also features a gimmick, the sw0rd can extend further from the rest of the Layer to create a \"Buster Mode\".

The inclusion of metal increases the weight of the Layer, granting higher inertia that increases both Knock-Out and Burst Attack as well as increasing the Layer's Burst resistance as the high inertia resists teeth skipping, a property that compliments the tall teeth of the Japanese release. However the asymmetrical design of the metal sw0rd means that this Layer is incredibly unbalanced, a trait that drains the Stamina of Combinations and can break a Combination's banking pattern. Furthermore, the shape of the Layer makes it a very poor choice for Opposite Spin matchups. Finally, Buster Xcalibur is so unbalanced that it cannot be used with unbalanced Discs such as 1, else it will lose Stamina too quickly to be effective in battle. Due to the nature of the gimmick, the recoil of Buster Xcalibur can be adjusted by either retracting or extending the sw0rd. However, the locking mechanism for the gimmick is weak, meaning that Buster Xcalibur is prone to switching to \"Buster Mode\" midway through the battle even if it was set to \"Normal Mode\". Like other Cho-Z Layers and previous Xcalibur Layers, Buster Xcalibur is unbalanced which increases Burst risk and drains Stamina. 

#Takara #Tomy #Beyblade #Burst #Cho-Z #B-120 #Starter #Buster #Xcalibur

Salamander S4 is a Balance Type Energy Layer with ten blades. As part of the Cho-Z Layer System, Hell Salamander features metal in its design; in this case, five of the ten blades are lined with metal. The inclusion of metal makes Hell Salamander heavier than most SwitchStrike/God Layers.

Salamander S4 also features gimmicks; the Layer is Left-Spin and the blades can move to create two modes, "Defense Mode" and "Attack Mode".

In Defense Mode, the metal and plastic blades are kept apart to create ten blades which reduces the gap in between the blades and creates a rounder, lower recoil design, akin to Wyvern. This, combined with the Left-Spin nature of Salamander S4, reduces recoil against Right-Spin opponents due to the Layers acting akin to gears which heavily reduces the rate of Bursts. Furthermore, the clockwise direction of the blades also reduce recoil, even against other Left-Spin opponents.

In Attack Mode, the metal and plastic blades become consolidated into five blades which increases the gap in between the blades and creates an aggressive, recoil heavy design against other Left-Spin opponents. However, due to Salamander S4's Left-Spin nature, recoil potential is significantly reduced against Right-Spin opponents.

Finally, the placement of the metal grants higher inertia that increases both KO and Burst Attack in Attack Mode, increases the Layer's Burst resistance in both modes as the high inertia resists teeth skipping, a property that heavily compensates for the medium length teeth of the Takara Tomy release and increases Stamina in both modes, giving Hell Salamander equal or greater Stamina than Crash Ragnaruk.

Like many other Cho-Z Layers, Hell Salamander is unbalanced, though not to the same degree as others, which increases Burst risk and drains Stamina. However, these issues can be solved with the use of a Level Chip that fits underneath the Layer.

Phoenix P4 is a Defense Type Energy Layer.  As a part of the Cho-Z Layer System, Revive Phoenix features metal in its design; in this case, lining the tips of the wings and surrounding the center. The inclusion of metal makes Revive Phoenix heavier than most SwitchStrike/God Layers. Phoenix P4 also features a gimmick; the Layer can Burst twice.

To Burst twice, the four bladed outer perimeter making up the wings, known as the Revive Armour, is attached to the rest of the Layer by a mechanism different to what connects a Layer to a Performance Tip and will only release once a Revive Phoenix Combination loses a click. Since the Revive Armour has a weaker lock than Revive Phoenix's own medium length teeth, it parries impacts with the opponent akin to Tornado Wyvern's free-spinning Layer. While the loss of the Revive Armour makes the Layer much lighter, the smoother perimeter this action creates reduces recoil to compensate.  

Like many other Cho-Z Layers, Revive Phoenix is unbalanced which increases Burst risk and drains Stamina. However, these issues can be solved with the use of a Level Chip that fits underneath the Layer.

New CHO-Z triple booster set. This set contains of 3 powerful beyblade.

- Hazard Kerbeus 7 Atomic (Defense Type Beyblade)

- Z Achilles 3Dagger Destroy (Attack Type Beyblade)

- Wolborg 8 Bearing (Stamina Type Beyblade)

Hazard Kerbeus is a Defense Type Energy Layer with two large blades and features three dog heads down the center, meant to represent the Layer's namesake, the mythological three headed hound Cerberus. As part of the Cho-Z Layer System, Hazard Kerbeus features metal in its design; in this case, the two blades are lined with metal in the shape of chains. The inclusion of metal makes the Layer heavier than most SwitchStrike/God Layers.

Z Achilles A4 is a Balance Type Energy Layer that features four large blades, creating a high recoil, rectangular shape. As part of the Cho-Z Layer System, Z Achilles features metal in its design; in this case, concentrated on the wings.

Wolborg is an adaptation of the Reverse Wolf Attack Ring and Wolborg Bit Chip from the Original Plastic Generation meant for the Burst System. As such it features an overall square/diamond shape with four wolf heads that act as the main contact points and an image of the Bit Beast Wolborg in the center. The only differences between the Energy Layer and the original Attack Ring are that the wolf heads are more rounded, lack the gap in the blades and are more compact making the Layer somewhat smaller overall and the "Bit Chip" is non-removable.

This booster pack only contain 1 beyblade out of the 8 designs.
Please note: One whole Beyblade is given in each individual booster. There is a 1/8 chance to get each Beyblade, including the prize Beyblade Parts marked in bold are new to the series

Beyblade Burst Cho-Z B-115 Booster Archer Hercules  is a symmetrical Stamina Type Energy Layer that features two bows on either side of the Layer and a face surrounded by that of a lion's, representing the Layer's namesake; Heracles, a divine hero of Greek mythology. As part of the Cho-Z Layer System, Archer Hercules features metal in its design; in this case, the two bows are lined with metal. The inclusion of metal makes this Layer heavier than most SwitchStrike/God Layers. Hercules H4 also features a gimmick; the bows can extend outwards, akin to Shadow Orichalcum and Orichalcum.

Like many other Cho-Z Layers, Archer Hercules is unbalanced, which increases Burst risk and drains Stamina. However, these issues can be solved with the use of a Level Chip that fits underneath the Layer.

An essential accessory to launch the Beyblade.  This launcher only supports right spin beyblade. 

Compatible with Beyblade Burst products only.

The Metal Weight is an Accessory that allow you to customize your launcher grip appearance. This accessory helps to add weight to the launcher grip and improve your launching performance. 

The Grip Rubber is an Accessory that allow you to customize your launcher grip appearance. 

This booster pack contains only 1 Beyblade out of the 8 models.

B-132 Random Booster Vol. 14 Driger Fang.0.Xt is the fourteenth Random Booster released as a part of the Beyblade Burst series.

One whole Beyblade is given in each individual booster. There is a 1/8 chance to get each Beyblade, including the prize Beyblade. Parts marked in bold are new to the series.

B-132 01: Winning Valkyrie 1' Operate

B-132 02: Spriggan Requiem 7 Absorb

B-132 03: Bloody Longinus 3 Press

B-132 04: Z Achilles 13Turn Blow'

B-132 05: Legend Spriggan 5Reach Eternal

B-132 06: Left Apollos 12Meteor Sword

B-132 07: Right Artemis 4Proof Orbit

B-132 08: Driger Fang 0 Xtend (Comes with Zan) (Prize)

Cho-Z Valkyrie.Z.EV  is an Attack Type Energy Layer, the center features a feathered, armored face facing forward, akin to its predecessor Winning Valkyrie, meant to represent the Layer's namesake; Odin's handmaidens of Norse mythology, albeit changed to match the anime's rendition; an armored knight. Like its predecessors, Cho-Z Valkyrie features three large wings as the primary points of contact, granting the Layer high Knock-Out and Burst Attack potential. As part of the Cho-Z Layer System, Cho-Z Valkyrie features metal in its design; in this case, concentrated behind each wing and in the center. However, Cho-Z Valkyriefeatures less metal than most other Cho-Z Layers and most of its weight comes from its size. Cho-Z Valkyrie also features a gimmick; the Layer features an anti-Bursting mechanism called the "Cho-Z Awakening System".

At high spin velocity, the centrifugal force activates a bistable mechanism, revealing red sub-wings called the "Cho-Z Wings" and in turn extending a Burst-stopping tab located in the left groove meant to fit the prongs of the Disc. This Burst-stopper then obstructs the Disc from moving during impact, preventing the loss of the last click and preventing the Cho-Z Valkyrie combination from Bursting. Due to the bistable mechanism, the wings and tab do not retract when spin speeds are low and must be manually pushed in after every match, the mechanism also allows the gimmick to work as intended.

Because of Cho-Z Valkyrie's triangular design, only the upper-left wing will move the tab with the other two being purely aesthetic. However, due to the bistable mechanism, Cho-Z Valkyrie requires rather extreme spin speeds for the gimmick to activate which may be difficult for younger bladers.

The Layer's size and the inclusion of metal makes Cho-Z Valkyrie heavier than most SwitchStrike/God Layers and improves Attack Potential by increasing the weight of the Layer, granting higher inertia that increases both KO and Burst Attack as well as increasing the Layer's Burst resistance as the high inertia resists teeth skipping, a property that compliments the tall teeth of the Takara Tomy release of Cho-Z Valkyrie. Due to these factors and the shape of the blades, Cho-Z Valkyrie performs well in Attack Combinations. However, the wings of Cho-Z Valkyrie show greater Attack potential when the "Cho-Z Wings" are not active as they cover up a more acute point of contact and when the "Cho-Z Wings" are active, the new point of contact is much more obtuse, reducing recoil. As such, Cho-Z Valkyrie almost requires the use of the three pointed Zenith Disc to concentrate weight at the points of contact to be effective with the gimmick activated.

Unlike previous Cho-Z Layers and like other Layers with the "Cho-Z" and "Turbo" prefixes, Cho-Z Valkyrie and Turbo Valtryek V3 are both incompatible with a Level Chip.

The Beyblade Burst Cho-Z Battle Set is a Set released as part of the Beyblade Burst Turbo series. 

Contents:

- Winning Valkyrie 12 Volcanic (Special Version)

- Z Achilles 11 Xtend (Special Version)

- Burst BeyStadium Standard Type

- Two Light Launcher and Long Winders

Geist Fafnir is a stamina type Beyblade.

Geist Fafnir, like its predecessor Drain Fafnir, is a Stamina Type Energy Layer that features a triangular perimeter and three side profile dragon heads with an "F" along each, meant to represent this Layer's namesake; Fafnir the Nordic Dragon of Greed. As part of the Cho-Z Layer System, Geist Fafnir features metal in its design; in this case, interspersed between the dragon heads. The inclusion of metal makes this Layer heavier than most SwitchStrike/God Layers.

Geist Fafnir also features gimmicks: The first is that this Layer is meant to spin Left, opposite to most other Beyblades. The second is that the "F"s are made of rubber, akin to both its predecessor and the L-Drago II Clear Wheel from Metal Fight Beyblade. The inclusion of rubber aids in this Layer's ability to equalize spin with a Right Spin opponent. The third is that the Layer features an automatic mode change gimmick, akin to Variares from Metal Fight Beyblade.

This booster pack contains only 1 Beyblade out of the 8 models.

B-125 Random Booster Vol. 12 Dead Hades.11T.Z is the twelfth Random Booster released as a part of the Beyblade Burst series.

One whole Beyblade is given in each individual booster. There is a 1/8 chance to get each Beyblade, including the prize Beyblade. Parts marked in bold are new to the series.

B-125 01: Dead Hades 11Turn Zephyr'

B-125 02: Hell Salamander Gravity Yielding

B-125 03: Archer Hercules Heavy Friction

B-125 04: Maximum Garuda 7Lift Sword

B-125 05: Deep Chaos 0Turn Xtend

B-125 06: Twin Nemesis 1'Hit Wedge

B-125 07: Shelter Regulus 8'Bump Destroy'

B-125 08: Beat Kukulcan 13Dagger Yard

The new Musou Bey Stadium is now available in the Chou-Z series and inherited the main feature - "auto spinning" from Mugen Infinite Bey Stadium DX. This new stadium has enhanced the auto spinning feature with two rotating tables on the same stadium and this set included two ultimate combinable Beyblades - Apollo and Artemis.
Content:- Musou Beystadium- Right Spin Artemis Infinite- Left Spin Apollos Infinite-L- Tools (fastener x2, electric unit, non-rotating dish x2, rotating plate x2)

Ultra strong super rare parts packed!! Set contents- Layers (4), Disks (4), Frames (3), Drivers (4), Switching tools (1), Stickers (1), Bay code cards (1), Correct playing instructions (1)

Content: 

- Bloody Longinus 1'Dagger Cycle

- Crash Ragnaruk 5Cross Volcanic'

- Orb Egis Outer Quest

- Cho-Z Spriggan 0Wall Zeta'

Turbo Achilles  is a Balance Type Energy Layer, the center features a shield and an armored face facing forward, unlike its predecessor where the face was seen from a side profile, meant to represent the Layer's namesake; the Greek hero, Achilles. The perimeter is made up of four large blades as the primary points of contact, two of which are molded in the shape of swords, granting the Layer high Knock-Out and Burst Attack potential. As part of the Cho-Z Layer System, Cho-Z Achilles features metal in its design; in this case, concentrated on the sword blades. Cho-Z Achilles also features a gimmick; the Layer features an anti-Bursting mechanism called the "Cho-Z Awakening System".

WBBA Exclusive Item - Beyblade Burst BBG-20 Event EX Booster Cho-Z Achilles 00 DM Gold Ver

Turbo Achilles  is a Balance Type Energy Layer, the center features a shield and an armored face facing forward, unlike its predecessor where the face was seen from a side profile, meant to represent the Layer's namesake; the Greek hero, Achilles. The perimeter is made up of four large blades as the primary points of contact, two of which are molded in the shape of swords, granting the Layer high Knock-Out and Burst Attack potential. As part of the Cho-Z Layer System, Cho-Z Achilles features metal in its design; in this case, concentrated on the sword blades. Cho-Z Achilles also features a gimmick; the Layer features an anti-Bursting mechanism called the "Cho-Z Awakening System".

This booster pack contains only 1 Beyblade out of the 8 models.

B-130 Random Booster Vol. 13 Air Knight.12E.ET is the thirteenth Random Booster released as a part of the Beyblade Burst series.

One whole Beyblade is given in each individual booster. There is a 1/8 chance to get each Beyblade, including the prize Beyblade. Parts marked in bold are new to the series.

B-130 01: Air Knight 12Expand Eternal (Prize)

B-130 02: Air Knight 11 Friction

B-130 03: Revive Phoenix 12 Fusion'

B-130 04: Hell Salamander 13 Blow'

B-130 05: Hazard Kerbeus 4 Merge'

B-130 06: Emperor Forneus 13Meteor Survive (Comes with a Level Chip)

B-130 07: Dranzer Flame 10Turn Sword

B-130 08: Wolborg 0Expand Atomic

Dead Phoenix.0.At is a powerful Defense Type Beyblade released as part of the Burst System as well as the Cho-Z Layer System.

This is the last Beyblade that released in Cho-Z series.

- The limited edition Achilles (White Knight Version)

- Included both limited version of  00 disc and DM driver. 

- The launcher is sold separately.

- Featuring the exact same gimmicks as the original version. 

Event Exclusive  Item - Beyblade Burst BBG-15 Event EX Booster Revive Phoenix 10 FR Silver

Phoenix P4 is a Defense Type Energy Layer.  As a part of the Cho-Z Layer System, Revive Phoenix features metal in its design; in this case, lining the tips of the wings and surrounding the center. The inclusion of metal makes Revive Phoenix heavier than most SwitchStrike/God Layers. Phoenix P4 also features a gimmick; the Layer can Burst twice.

To Burst twice, the four bladed outer perimeter making up the wings, known as the Revive Armour, is attached to the rest of the Layer by a mechanism different to what connects a Layer to a Performance Tip and will only release once a Revive Phoenix Combination loses a click. Since the Revive Armour has a weaker lock than Revive Phoenix's own medium length teeth, it parries impacts with the opponent akin to Tornado Wyvern's free-spinning Layer. While the loss of the Revive Armour makes the Layer much lighter, the smoother perimeter this action creates reduces recoil to compensate.  

Like many other Cho-Z Layers, Revive Phoenix is unbalanced which increases Burst risk and drains Stamina. However, these issues can be solved with the use of a Level Chip that fits underneath the Layer.

Event Exclusive  Item - Beyblade Burst BBG-16 Event EX Rubber Launcher Grip Phoenix Ver

A rubber launcher grip that used to attach to the bottom of the launcher. An essential accessory for every Beyblade player, the grip is amazing to hold and it can help to stabilize the launcher to make better shoot!

WBBA Store Exclusive Item - Beyblade Burst BBG-22 WBBA Store Exclusive Booster Cho-Z Valkyrie 1R RB

Cho-Z Valkyrie.1R.RB  is an Attack Type Energy Layer, the center features a feathered, armored face facing forward, akin to its predecessor Winning Valkyrie, meant to represent the Layer's namesake; Odin's handmaidens of Norse mythology, albeit changed to match the anime's rendition; an armored knight. Like its predecessors, Cho-Z Valkyrie features three large wings as the primary points of contact, granting the Layer high Knock-Out and Burst Attack potential. As part of the Cho-Z Layer System, Cho-Z Valkyrie features metal in its design; in this case, concentrated behind each wing and in the center. However, Cho-Z Valkyriefeatures less metal than most other Cho-Z Layers and most of its weight comes from its size. Cho-Z Valkyrie also features a gimmick; the Layer features an anti-Bursting mechanism called the "Cho-Z Awakening System".

At high spin velocity, the centrifugal force activates a bistable mechanism, revealing red sub-wings called the "Cho-Z Wings" and in turn extending a Burst-stopping tab located in the left groove meant to fit the prongs of the Disc. This Burst-stopper then obstructs the Disc from moving during impact, preventing the loss of the last click and preventing the Cho-Z Valkyrie combination from Bursting. Due to the bistable mechanism, the wings and tab do not retract when spin speeds are low and must be manually pushed in after every match, the mechanism also allows the gimmick to work as intended.

Because of Cho-Z Valkyrie's triangular design, only the upper-left wing will move the tab with the other two being purely aesthetic. However, due to the bistable mechanism, Cho-Z Valkyrie requires rather extreme spin speeds for the gimmick to activate which may be difficult for younger bladers.

The Layer's size and the inclusion of metal makes Cho-Z Valkyrie heavier than most SwitchStrike/God Layers and improves Attack Potential by increasing the weight of the Layer, granting higher inertia that increases both KO and Burst Attack as well as increasing the Layer's Burst resistance as the high inertia resists teeth skipping, a property that compliments the tall teeth of the Takara Tomy release of Cho-Z Valkyrie. Due to these factors and the shape of the blades, Cho-Z Valkyrie performs well in Attack Combinations. However, the wings of Cho-Z Valkyrie show greater Attack potential when the "Cho-Z Wings" are not active as they cover up a more acute point of contact and when the "Cho-Z Wings" are active, the new point of contact is much more obtuse, reducing recoil. As such, Cho-Z Valkyrie almost requires the use of the three pointed Zenith Disc to concentrate weight at the points of contact to be effective with the gimmick activated.

Unlike previous Cho-Z Layers and like other Layers with the "Cho-Z" and "Turbo" prefixes, Cho-Z Valkyrie and Turbo Valtryek V3 are both incompatible with a Level Chip.

WBBA Store Exclusive Item - Beyblade Burst BBG-18 WBBA Store Exclusive Booster Emperor Forneus 4G HN

Emperor Forneus is a round Defense Type Energy Layer that features twelve counter-clockwise blades that create a low-recoil design and two shark heads that go from the perimeter to the center, meant to represent the Layer's namesake; the sea monster Forneus, a Great Marquis of Hell in demonology, the sea monster