It's a Stamina type left-spinning top with a God Ability called "Drain Spin" which the rubber in the Layer would increase more spinning speeds when in contact with right-spinning Beyblades.


#Takara #Tomy #Beyblade #Burst #God #B-79 #Starter #Drain #Fafnir #8NT

Fans of Beyblade Burst Manga and animated series will enjoy checking out this Beyblade Burst Starter by Takara Tomy. This version of the God Valkeryie comes with a six-volt launcher and weighs in at less than 4 ounces. The Burst disc puts out an extra layer of speed after you launch it so you can confuse others. Boys and girls between the ages of 6 and 12 can enjoy the Bayblade Burst Starter, and it's easy for children to put together.

It's an Attack type top with a God Ability called "Bound Attack" which the spring loaded Layer would increase Burst attack by moving upon impact and forcibly springing back

- 100% Authentic & Genuine Takara Tomy Product

- 100% Same as described in photos/title

- Beyblade Burst B-96 Infinite Bey Stadium DX Set

- Compatible with Beyblade Burst product only

- Let it rip with Beyblade Burst, the third generation of the popular Beyblade franchise

- Play against your friends or join the battle at the tournaments to test to your skill

Contents of set : Shock God Valkyrie Infinity (Shooting God Chip, Layer, Driver) (1), Infinite Bay Stadium (Base · Transparent Cover · Fixed Part) (1), Electric Unit (1), Black Plate (1), Tornado Plate (1), tool (1), bay code card (1), correct way to play (1), sticker (1)

A standard black color battle arena for beyblade to battle each other. 

It has a continuous hitless effect on it's wing-blades. The large and small blades with built-in free spinning sphere in it's driver can nimbly pass through the attacks from other Beyblades.


#beyblade #toys

• Beyblade Burst B-56 Unlock Unicorn.D.N (Active Toy)
  
• Low center of gravity disk and high-friction driver equipped

Luinor L4 is a wide Energy Layer designed for Left-Spin Attack that features five dragon heads, representing the anime's rendition of this Layer's beast; a dragon, with one in the center of the Layer and four that line each of the wings that make up the points of contact, creating a diamond and thus aggressive and high recoil design. The snouts of the dragons and the tip of each wing are molded into the shape of spear heads which are meant to represent this Layer's Japanese namesake; the Roman Soldier Longinus of Christian Mythology who stabbed Christ with a lance.
As part of the Cho-Z Layer System and like previous Luinor/Longinus Layers, Bloody Longinus features metal in its design; in this case, each of the outer dragon heads are made of metal. The inclusion of metal makes Bloody Longinus heavier than most SwitchStrike/God Layers.
The heavy weight of Bloody Longinus' metal dragon heads generate high inertia which increases the Layer's KO and Burst potential. However, the Left-Spin nature of Luinor L4 means that it and a Right-Spin opponent's Layer will spin together like gears if they are of similar spin speed, which heavily reduces recoil and the rate of Bursts. However, the recoil-heavy diamond shape can still create strong KO potential, though not to the degree of Luinor L3, in Opposite-Spin battles and makes Luinor L4 outclass its predecessor in Burst Attack potential in Left-Spin vs. Left-Spin battles. 
Furthermore, Luinor L4 is very wide in shape, which increases its Attack range and allows greater room for error in Banking Patterns. While the opposite spin allows for some degree of Spin Equalization, it is not to the degree of Geist Fafnir or Spriggan Requiem.
Like many other Cho-Z Layers, Bloody Longinus is unbalanced which increases the risk of Bursts, is liable to break Banking Patterns and drains Stamina. However, these issues can be solved with the use of a Level Chip that fits underneath the Layer.
#Takara #Tomy #Beyblade #Burst #Cho-Z #B110 #Starter #Bloody #Longinus

Takara Tomy Beyblade Burst Cho-Z B-106 Booster Emperor Forneus

Emperor Forneus is a round Defense Type Energy Layer that features twelve counter-clockwise blades that create a low-recoil design and two shark heads that go from the perimeter to the center, meant to represent the Layer's namesake; the sea monster Forneus, a Great Marquis of Hell in demonology, the sea monster

Winning Valtryek is an Attack Type Energy Layer, the center features a feathered, armored face facing forward, akin to its predecessor God Valkyrie, meant to represent the Layer's namesake; Odin's handmaidens of Norse mythology, albeit changed to match the anime's rendition; an armored knight. Like its predecessors, Wonder Valtryek V4 features three large wings as the primary points of contact, granting the Layer high KO and Burst Attack potential. As part of the Cho-Z Layer System, Winning Valkyrie features metal in its design; in this case, concentrated on the wings.

Like many other Cho-Z Layers, Winning Valkyrie is unbalanced which increases Burst risk, is liable to break Banking Patterns and drains Stamina. However, these issues can be solved with the use of a Level Chip that fits underneath the Layer.

#Takara #Tomy #Beyblade #Cho #Z #B104 #Starter #Winning #Valkyrie

Luinor L4 is a wide Energy Layer designed for Left-Spin Attack that features five dragon heads, representing the anime's rendition of this Layer's beast; a dragon, with one in the center of the Layer and four that line each of the wings that make up the points of contact, creating a diamond and thus aggressive and high recoil design. The snouts of the dragons and the tip of each wing are molded into the shape of spear heads which are meant to represent this Layer's Japanese namesake; the Roman Soldier Longinus of Christian Mythology who stabbed Christ with a lance.

As part of the Cho-Z Layer System and like previous Luinor/Longinus Layers, Bloody Longinus features metal in its design; in this case, each of the outer dragon heads are made of metal. The inclusion of metal makes Bloody Longinus heavier than most SwitchStrike/God Layers.

The heavy weight of Bloody Longinus' metal dragon heads generate high inertia which increases the Layer's KO and Burst potential. However, the Left-Spin nature of Luinor L4 means that it and a Right-Spin opponent's Layer will spin together like gears if they are of similar spin speed, which heavily reduces recoil and the rate of Bursts. However, the recoil-heavy diamond shape can still create strong KO potential, though not to the degree of Luinor L3, in Opposite-Spin battles and makes Luinor L4 outclass its predecessor in Burst Attack potential in Left-Spin vs. Left-Spin battles.

Furthermore, Luinor L4 is very wide in shape, which increases its Attack range and allows greater room for error in Banking Patterns. While the opposite spin allows for some degree of Spin Equalization, it is not to the degree of Geist Fafnir or Spriggan Requiem.

Like many other Cho-Z Layers, Bloody Longinus is unbalanced which increases the risk of Bursts, is liable to break Banking Patterns and drains Stamina. However, these issues can be solved with the use of a Level Chip that fits underneath the Layer.

#Takara #Tomy #Beyblade #Burst #Cho-Z #B110 #Starter #Bloody #Longinus

Buster Xcalibur, like its predecessors, is an Attack Type Energy Layer based on the legendary sw0rd Excalibur that features a large sw0rd running down the length of the layer, the end of which protrudes from the bottom which acts as the primary point of contact. Unlike previous Xcalibur Layers such as Sieg Xcalibur and Xeno Xcalibur, Buster Xcalibur’s contact point is very pronounced which creates high Knock-Out and Burst Attack potential, but also creates high recoil. As part of the Cho-Z Layer System, Buster Xcalibur features metal in its design. in this case, the sw0rd is made of metal, akin to its predecessor Sieg Xcalibur. However the tip of the sw0rd is covered in plastic, to reduce the possibility of breaking the opponent's Layer. Buster Xcalibur also features a gimmick, the sw0rd can extend further from the rest of the Layer to create a \"Buster Mode\".

The inclusion of metal increases the weight of the Layer, granting higher inertia that increases both Knock-Out and Burst Attack as well as increasing the Layer's Burst resistance as the high inertia resists teeth skipping, a property that compliments the tall teeth of the Japanese release. However the asymmetrical design of the metal sw0rd means that this Layer is incredibly unbalanced, a trait that drains the Stamina of Combinations and can break a Combination's banking pattern. Furthermore, the shape of the Layer makes it a very poor choice for Opposite Spin matchups. Finally, Buster Xcalibur is so unbalanced that it cannot be used with unbalanced Discs such as 1, else it will lose Stamina too quickly to be effective in battle. Due to the nature of the gimmick, the recoil of Buster Xcalibur can be adjusted by either retracting or extending the sw0rd. However, the locking mechanism for the gimmick is weak, meaning that Buster Xcalibur is prone to switching to \"Buster Mode\" midway through the battle even if it was set to \"Normal Mode\". Like other Cho-Z Layers and previous Xcalibur Layers, Buster Xcalibur is unbalanced which increases Burst risk and drains Stamina. 

#Takara #Tomy #Beyblade #Burst #Cho-Z #B-120 #Starter #Buster #Xcalibur

Salamander S4 is a Balance Type Energy Layer with ten blades. As part of the Cho-Z Layer System, Hell Salamander features metal in its design; in this case, five of the ten blades are lined with metal. The inclusion of metal makes Hell Salamander heavier than most SwitchStrike/God Layers.

Salamander S4 also features gimmicks; the Layer is Left-Spin and the blades can move to create two modes, "Defense Mode" and "Attack Mode".

In Defense Mode, the metal and plastic blades are kept apart to create ten blades which reduces the gap in between the blades and creates a rounder, lower recoil design, akin to Wyvern. This, combined with the Left-Spin nature of Salamander S4, reduces recoil against Right-Spin opponents due to the Layers acting akin to gears which heavily reduces the rate of Bursts. Furthermore, the clockwise direction of the blades also reduce recoil, even against other Left-Spin opponents.

In Attack Mode, the metal and plastic blades become consolidated into five blades which increases the gap in between the blades and creates an aggressive, recoil heavy design against other Left-Spin opponents. However, due to Salamander S4's Left-Spin nature, recoil potential is significantly reduced against Right-Spin opponents.

Finally, the placement of the metal grants higher inertia that increases both KO and Burst Attack in Attack Mode, increases the Layer's Burst resistance in both modes as the high inertia resists teeth skipping, a property that heavily compensates for the medium length teeth of the Takara Tomy release and increases Stamina in both modes, giving Hell Salamander equal or greater Stamina than Crash Ragnaruk.

Like many other Cho-Z Layers, Hell Salamander is unbalanced, though not to the same degree as others, which increases Burst risk and drains Stamina. However, these issues can be solved with the use of a Level Chip that fits underneath the Layer.

Phoenix P4 is a Defense Type Energy Layer.  As a part of the Cho-Z Layer System, Revive Phoenix features metal in its design; in this case, lining the tips of the wings and surrounding the center. The inclusion of metal makes Revive Phoenix heavier than most SwitchStrike/God Layers. Phoenix P4 also features a gimmick; the Layer can Burst twice.

To Burst twice, the four bladed outer perimeter making up the wings, known as the Revive Armour, is attached to the rest of the Layer by a mechanism different to what connects a Layer to a Performance Tip and will only release once a Revive Phoenix Combination loses a click. Since the Revive Armour has a weaker lock than Revive Phoenix's own medium length teeth, it parries impacts with the opponent akin to Tornado Wyvern's free-spinning Layer. While the loss of the Revive Armour makes the Layer much lighter, the smoother perimeter this action creates reduces recoil to compensate.  

Like many other Cho-Z Layers, Revive Phoenix is unbalanced which increases Burst risk and drains Stamina. However, these issues can be solved with the use of a Level Chip that fits underneath the Layer.

Old Stock > Poor Box Condition

The Sagittario Wheel is generally round featuring two large crescents forming Sagittario's bows with another two small spaces in between. This Wheel has been severely outclassed by the likes of Burn , Flame and even Earth as a Survival Wheel, therefore it cannot measure at all against top-tier Stamina Metal Wheels such as Duo. Due to its aggression, it could be well utilized as a Smash Attacker with the ability to score some amazing KO's thanks to its compacted weight around the edges. However, it has since been completely outclassed by the much heavier Metal Wheels and Chrome Wheels released such as Girago, Flash, VariAres, etc. which have more aggressive features.

New CHO-Z triple booster set. This set contains of 3 powerful beyblade.

- Hazard Kerbeus 7 Atomic (Defense Type Beyblade)

- Z Achilles 3Dagger Destroy (Attack Type Beyblade)

- Wolborg 8 Bearing (Stamina Type Beyblade)

Hazard Kerbeus is a Defense Type Energy Layer with two large blades and features three dog heads down the center, meant to represent the Layer's namesake, the mythological three headed hound Cerberus. As part of the Cho-Z Layer System, Hazard Kerbeus features metal in its design; in this case, the two blades are lined with metal in the shape of chains. The inclusion of metal makes the Layer heavier than most SwitchStrike/God Layers.

Z Achilles A4 is a Balance Type Energy Layer that features four large blades, creating a high recoil, rectangular shape. As part of the Cho-Z Layer System, Z Achilles features metal in its design; in this case, concentrated on the wings.

Wolborg is an adaptation of the Reverse Wolf Attack Ring and Wolborg Bit Chip from the Original Plastic Generation meant for the Burst System. As such it features an overall square/diamond shape with four wolf heads that act as the main contact points and an image of the Bit Beast Wolborg in the center. The only differences between the Energy Layer and the original Attack Ring are that the wolf heads are more rounded, lack the gap in the blades and are more compact making the Layer somewhat smaller overall and the "Bit Chip" is non-removable.

This booster pack only contain 1 beyblade out of the 8 designs.
Please note: One whole Beyblade is given in each individual booster. There is a 1/8 chance to get each Beyblade, including the prize Beyblade Parts marked in bold are new to the series

Beyblade Burst Cho-Z B-115 Booster Archer Hercules  is a symmetrical Stamina Type Energy Layer that features two bows on either side of the Layer and a face surrounded by that of a lion's, representing the Layer's namesake; Heracles, a divine hero of Greek mythology. As part of the Cho-Z Layer System, Archer Hercules features metal in its design; in this case, the two bows are lined with metal. The inclusion of metal makes this Layer heavier than most SwitchStrike/God Layers. Hercules H4 also features a gimmick; the bows can extend outwards, akin to Shadow Orichalcum and Orichalcum.

Like many other Cho-Z Layers, Archer Hercules is unbalanced, which increases Burst risk and drains Stamina. However, these issues can be solved with the use of a Level Chip that fits underneath the Layer.