Venusaur is a large, dinosaur-like Pokémon that is somewhat similar in appearance to its pre-evolved forms, Ivysaur and Bulbasaur. Its skin still retains a light turquoise color, but it no longer has the spots, and it appears more rough and scaly, with bumps here and there.  There is also a third spike protruding in the middle of its chest.

Charizard is a large, dragon-like Pokémon that differs greatly from its pre-evolved form. The red skin coloration of Charmeleon is no longer apparent, as Charizard appears to have reverted back to the orange/yellow coloration of Charmander. The single horn that was on the back of its head is now two, one on either side.

Scorbunny looks like a small white rabbit with reddish-orange patches at both the tips of its ears and feet and light yellow rectangles on its face right between the eyes and the soles of its feet. Around its neck comes with a red item that looks like a circular pillow that gives an impression of the collar.

Greninja, like its previous evolution, has the body style of a frog. In this form, it now resembles Toxicroak and has gained the appearance of a ninja. It is dark blue in color and has its tongue wrapped around its neck like a scarf instead of the bubbles found on Froakie and Frogadier.

Meltan is a small Pokémon with a gold head, which resembles a hex nut, and a glossy silver body. A black sphere floats in the center of Meltan's head like a magnet; the sphere itself is Meltan's eye. A red cable sticks out from Meltan's back, acting as a tail. Its hex nut head can also spin and it is revealed to be the primary source of Meltan’s eye power.

Its shiny form has a light brown color on its hex nut head and a blue cable tail.

Lucario is a bipedal dog/wolf/jackal-like Pokémon, with a few kangaroo and/or raccoon-like characteristics as well. Though similar in appearance to Riolu, Lucario has some notable differences. Its forepaws are black and it has large pointed spikes in place of the oval shaped bumps on Riolu. There is also a third spike protruding in the middle of its chest.

Although it retains the same gold hex nut, red cable-like tail, and metallic silver liquid body of its pre-evolved form, Melmetal has a muscular build, in addition of having another gold hex nut for a neck or look like a mask, and black hex nuts on its chest, and each two hands, shoulders, elbows and feet respectively.

Zeraoa is a tiger like pokemon. It has mostly yellow fur with black lightning bolt designs, which cover its head, arms and part of it legs. It also has black fur on its face. It has blue bolts for whiskers and a blue spike on its head.

Zoroark is a foxlike Pokémon covered mainly in dark grayish fur. It has a pointed muzzle, red lining around its eyes and mouth, teal eyes, a fluffy black ruff of fur around its neck, and a long, voluminous crimson red spiky mane with gray tips. A teal-colored band encircles the bottom part of Zoroark's mane like a ponytail. It has three sharp red claws on both its hands and feet.

Zoroark is able to stand upright on two legs like a biped, but it usually runs upon its forelimbs.

Garchomp is a bipedal shark-like Pokémon colored mostly red and dark blue. On its head it possesses two horn-like appendages and a star-like yellow mark on its snout. Its arms have one claw each, and triangular fins emerge from its elbows and back.

Xerneas is a quadrupedal stag-like Pokémon with a blue and black coat. Along its back, it has multicolored spots that glow when it is in battle. It has long, gleaming yellow antlers that shine with all of the colors of the spectrum; its antlers resemble the roots of a tree.

Yveltal possesses avian and draconian traits. It has large wings and a tail that are red colored internally and black colored externally. It has intense teal-colored eyes with white pupils. When Yveltal straightens its arms in flight, it forms the shape of a Y. Its talons are also Y-shaped. Yveltal is part flying type, and based on the concept of the y-axis.

Black Kyurem is the form of Kyurem merges with Zekrom, allowing it to use Electric-type moves together with dragon and ice-type moves.  It's consider as a new type of Legendary Pokemon.

Necrozma's true powers lies in its Ultra Burst form. This occurs when it absorbs either Solgaleo's or Lunala's light, and it harnesses it as it’s own, it becomes a light dragon and Psychic/Dragon Type. This Ultra Burst form is actually Necrozma's true form.

Event Exclusive  Item - Beyblade Burst BBG-17 Event EX Bey Laucher LR Gold Ver.

A bey launcher that support both left and right spin. A clever device under the cord is used to change the mode easily to either a left or right spinning launcher. This makes it compatible with every Beyblades.

Event Exclusive  Item - Beyblade Burst BBG-15 Event EX Booster Revive Phoenix 10 FR Silver

Phoenix P4 is a Defense Type Energy Layer.  As a part of the Cho-Z Layer System, Revive Phoenix features metal in its design; in this case, lining the tips of the wings and surrounding the center. The inclusion of metal makes Revive Phoenix heavier than most SwitchStrike/God Layers. Phoenix P4 also features a gimmick; the Layer can Burst twice.

To Burst twice, the four bladed outer perimeter making up the wings, known as the Revive Armour, is attached to the rest of the Layer by a mechanism different to what connects a Layer to a Performance Tip and will only release once a Revive Phoenix Combination loses a click. Since the Revive Armour has a weaker lock than Revive Phoenix's own medium length teeth, it parries impacts with the opponent akin to Tornado Wyvern's free-spinning Layer. While the loss of the Revive Armour makes the Layer much lighter, the smoother perimeter this action creates reduces recoil to compensate.  

Like many other Cho-Z Layers, Revive Phoenix is unbalanced which increases Burst risk and drains Stamina. However, these issues can be solved with the use of a Level Chip that fits underneath the Layer.

Event Exclusive  Item - Beyblade Burst BBG-16 Event EX Rubber Launcher Grip Phoenix Ver

A rubber launcher grip that used to attach to the bottom of the launcher. An essential accessory for every Beyblade player, the grip is amazing to hold and it can help to stabilize the launcher to make better shoot!

In commemoration of the 20th anniversary of the "burst shoot Beyblade", nine kinds of Beyblade appear as Beyblade burst version! Special specification that bay was colored! Draciel F, which reproduces the color of the time as a new bay, is finally back! In addition, the inside of the commemorative box is also accompanied by a new illustrations drawn by Takao Aoki!

- Included 9 different kind of Beyblade

- Launcher is sold separately.

- Molded into Beyblade Burst specification

- Deluxe packaging

2 in 1 Bundle Set wit Free Gift of Big Great Ball!

Mega Blastoise are large, tortoise-like Pokémon with some features similar to those of its pre-evolved forms. Mega Blastoise has a large blue body, cream-colored stomach, small fat arms with 2 sub water cannons and legs, and a large brown shell rimmed with white, featuring its water cannon. 

Charizard is a Fire/Flying-type Pokémon introduced in Generation I. It can mega evolve into either Mega Charizard X using the Charizardite X or Mega Charizard Y using the Charizardite Y. 

Disclaimer:  The packaging condition may vary individually.  Kindly please contact us to confirm the packaging condition before placing order, thank you.  

Brand: Tomica 

Manufacturer: Takara Tomy

Scale: 1/61

Series: Tomica 

Release Date: Mid Jan., 2020

Material: Diecast

Item size:  7.8 x 4 x 2.8 cm

Item weight: 44g

Made in Vietnam

Action: Car Roof Removable

Takara Tomy Pla Rail Plarail R-13 Single/Double Point Rail

Plarail is a long-running series of railroad toys which originated in Japan more than 50 years ago. 
Children can connect the rails and add scenery parts in any way they like, then run the trains on the tracks for unlimited hours of play.

Chikorita are a small dinosaur-like Pokémon, particularly resembling a Sauropoda. They're a light green color and their eyes are dull red. Around its neck are tiny buds that have the ability to shoot out into long vines. Its most notable feature's the large leaf on the top of its head. They have four short legs with one toenail on each foot.

The MetaColle (Metal Collection) series is a line of palm-size die-cast figurines that  5 to 10 cm tall from different franchises. Each figure is highly detailed and features simple articulation (Articulated joint is not applied to every Metalcolle figure).

The MetaColle (Metal Collection) series is a line of palm-size die-cast figurines that  5 to 10 cm tall from different franchises. Each figure is highly detailed and features simple articulation (Articulated joint is not applied to every Metalcolle figure).

The MetaColle (Metal Collection) series is a line of palm-size die-cast figurines that  5 to 10 cm tall from different franchises. Each figure is highly detailed and features simple articulation (Articulated joint is not applied to every Metalcolle figure).

The MetaColle (Metal Collection) series is a line of palm-size die-cast figurines that  5 to 10 cm tall from different franchises. Each figure is highly detailed and features simple articulation (Articulated joint is not applied to every Metalcolle figure).

The MetaColle (Metal Collection) series is a line of palm-size die-cast figurines that  5 to 10 cm tall from different franchises. Each figure is highly detailed and features simple articulation (Articulated joint is not applied to every Metalcolle figure).

The MetaColle (Metal Collection) series is a line of palm-size die-cast figurines that  5 to 10 cm tall from different franchises. Each figure is highly detailed and features simple articulation (Articulated joint is not applied to every Metalcolle figure).

The MetaColle (Metal Collection) series is a line of palm-size die-cast figurines that  5 to 10 cm tall from different franchises. Each figure is highly detailed and features simple articulation (Articulated joint is not applied to every Metalcolle figure).

Disclaimer:  The packaging condition may vary individually.  Kindly please contact us to confirm the packaging condition before placing order, thank you. 

Brand: Tomica 

Manufacturer: Takara Tomy

Series: Dream Tomica

Release Date: Late Jan., 2017

Material: Diecast

Item size:  16.5 x 12.4 x 8.8 cm

Item weight: 473g

Made in Vietnam/China